Loading... Please wait...

Our Newsletter

12V, 30A, Battery Charger, c/w Dip Switch & Lugs..ETL Safety Listed

  • Image 1
8.00 LBS
Calculated at checkout

Product Description

This advanced fully automatic three-stage 30 Amp battery charger is ideal for charging all types of 12 Volt lead-acid batteries ( Flooded / Absorbed Glass Mat (AGM) / Gel Cell) from a 120 V, 60 Hz or 230 V, 50 Hz AC source. By means of a DIP switch setting, conversion to a two-stage algorithm is possible to charge batteries connected to a DC load (DC UPS). The unit can also be used as a DC Power Supply. Features include overload, short-circuit and over-temperature protection. The unit allows charging of up-to 3 separate battery banks.


Design Features

  • Switch mode technology for high efficiency, lightweight and quiet operation
  • Automatic operation for ALL Lead Acid Batteries Flooded, AGM or Gel Cell
  • Can charge 3 banks of batteries simultaneously, no isolator necessary
  • Can be used as a power supply or DC UPS when used in conjunction with a battery
  • User Configurable AC Input voltage 120 or 230 VAC, 50 / 60 Hz
  • User Selectable ( by DIP Switch) Selectable for 2 or 3 stage, rapid and safe charging of stand-alone and loaded Lead Acid Batteries
  • Ammeter & LED power status indicator
  • Protections: Short circuit, overload, reverse battery polarity
  • Fan cooled based on output current
  • Safety certified and listed to UL Standard UL-1564
  • EMI Compliant to FCC Part 15(B), Class B


Model No.  SEC-1230UL
Nominal Input Voltage (pre-set)  120 VAC, 60 Hz, 6.5A
Internal Jumper Change  230 VAC, 50 Hz
Input Frequency  50 / 60 Hz
Output Voltage, Boost  14 VDC, or 14.4 VDC or disabled
Output Voltage, Float  1 13.5 VDC
Output Amps  30A
Operating Temperature Range 0 - 40°C / 32˚F - 104˚F
Weight, lb  6.4
Weight, kg  2.9
Dimensions (L x W x H), INCHES 10.8 x 8.4 x 3.3
Dimensions (L x W x H), MM 280 x 214 x 83
Protections  Short Circuit, Over Current, Over Temperature, Reverse Battery Polarity
Output Banks  3
Safety Compliance i) Conforms to ANSI/UL STD 1564
ii) Certified to CAN/CSA STD C22.2 No. 107.2
EMI Compliance FCC Part 15(B), Class B




Find Similar Products by Category

Add to Wish List

Click the button below to add the 12V, 30A, Battery Charger, c/w Dip Switch & Lugs..ETL Safety Listed to your wish list.

You Recently Viewed...